Closet Structure: Part 2

 So I have been using my closet structure but the press fit was not holding up with weight on it.  And the joints would come unattached if I didn't pull it just right.

When Rachel and dad were in town we pulled it out into the backyard and used the primer and PVC cement to connect them permanently.

This was actually slightly nerve racking for me because it meant we needed to be relatively square with the joints and not rotate the bottom with the sliders attached. (and keep track of where each piece went) we did ok.

You can tell how nervous I was by the fact that I was sitting down... Unfortunately it was too windy to spray paint (sailing buddies: that was Sunday of windpoint...), so it will have to come down stairs again to be made more pretty.